BaSt-Ing “Schleiferl” chain sharpener

The BaSt-Ing “Schleiferl” V1.2 chain sharpener, featuring a new and further refined design, is the sharpening tool of the future, capable of eliminating the disadvantages of previous sharpening tools.

Description

The “Schleiferl” is the first chain sharpening tool that works with an abrasive belt. It is powered by small hex drivers. The rotation speed of the drivers should be at least 3000 rpm.

• High removal rate
• Perfectly shaped tooth profiles (top plate and side plate angles), easily achieved
• No overheating of the teeth
• The chrome layer of the saw teeth is not damaged
• No loss of shape of the sharpening tool due to wear
• The chain is sharpened on the bar
• Tolerates angular errors during sharpening thanks to the abrasive belt that widens upwards
• Suitable for both very small chains (1/4″ Picco) and harvester chains (.404) (additional grinding shafts required)
• Economical and fast

Practical tip on abrasive belt life: high rotation speed + low contact pressure = long abrasive belt life.

Abrasive grains can wear down in the micrometer range, but they need sufficient time to work the steel. Too much grinding pressure causes the entire grain to be torn from the abrasive belt. High belt speed and low contact pressure give the abrasive grain the time it needs to work the saw tooth.

Standard package contents:

• Sharpener with high-quality transport bag included
• 1 replacement abrasive belt
• Grinding shaft with 0.325 chain pitch
• Grinding shaft with 3/8″ chain pitch