Nordforest Winch 1800

Maximum direct pulling force: 1800 kg at 12 m/min or 900 kg at 24 m/min; maximum pulling force with redirect: 3600 kg. Rope diameter: 12 – 14 mm. Active Brutale 6.5 engine (2-stroke), 3.3 kW (4.48 HP). Runs on special fuel (2-stroke alkylate petrol). Sound power level 115 dB.

The Nordforest Spill 1800 winch is the winch with the highest pulling force available on the market. Thanks to its enormous pulling power combined with a relatively light weight, it’s the right choice for a wide range of jobs. Whether you’re hauling timber, securing and moving leaning trees, recovering vehicles, retrieving game, or setting up mountain shoring – with the Spill 1800 winch, you’re always on the safe side.

All winch functions – hauling and load locking – can be controlled remotely from the winch, outside the danger zone (safety distance 5 m). Pulling the free end of the rope activates the throttle lever on the control unit, and the winch starts to turn. At the same time, this function acts as the main safety device, the so-called “dead man’s” system. If the pulling rope is released, the winch engine runs idle and the load is held securely by the clamp and the rope’s friction on the winch drum.

The capstan drum offers two further key advantages over traditional drum winches. On one hand, you can use a lightweight plastic rope. In this case, the rope length can be freely chosen, since it can be wound around the capstan at any point. On the other hand, the pulling force always stays constant, as there’s always just one rope strand on the capstan drum.

The Spill 1800 winch is powered by Active’s Brutale 6.5 2-stroke engine. The engine runs on the same special fuel (2-stroke alkylate petrol) used for your chainsaw and works regardless of position. Equipped with a top-quality epicyclic gearbox with 2-speed transmission, the Spill winch reaches a maximum pulling force of 1800 kg at 12 m/min or 900 kg at 24 m/min.

• Maximum direct pulling force: 1800 kg at 12 m/min or 900 kg at 24 m/min
• Maximum redirected pulling force: 3600 kg
• For winch ropes with core and sheath, 12 – 14 mm
• Active Brutale 6.5 engine (2-stroke), 3.3 kW (4.48 HP)
• Runs on special fuel (2-stroke alkylate petrol)
• Sound power level 115 dB
• Planetary gearbox with ball bearings and 2-speed transmission
• Constant pulling force
• Unlimited rope length
• Load-holding function
• Dimensions 380 x 400 x 330 mm
• Weight: 13.2 kg

Supplied without accessories. Use only with core-and-sheath hoist winch ropes in the specified diameters and with the corresponding breaking loads. Not suitable for use with hollow-braid ropes!